bathroom
 






 

Question by  raviteja (26)

How can I prepare for painting the bathroom baseboards?

 
+7

Answer by  worker12 (293)

Scuff wood with sponge sanding block wrapped with 180 grit sanding paper. You don't have to take it down to bare wood.Next tac cloth the baseboards,then apply with a regular dish sponge Klean Strip Easy liquid sandpaper.Allow that to dry 10 minutes. Next put a prime coat on,let that dry.Apply finish coat.

 
+6

Answer by  Latin4 (11170)

The first step in preparing to paint the bathroom baseboards is to throughly clean the boards with any household cleaner. Let dry. Scrape or sand any loose paint chips. Prime areas that are bare wood. Paint with oil base paint. It might take a little longer to dry but it is well work the effort.

 
+6

Answer by  Mradcliff (118)

First you will want to mask any areas that you do not want to paint, like the floor and the walls. This can be done a few ways. You can cover the floors with a tarp and tape newpaper to the wall to mask any area you do not want paint on.

 
+6

Answer by  workingwoman11 (195)

Place a plastic sheet across the floor so no paint falls on it. Next get some blue painters tape and tape off the area above the baseboard. Next take the blue tape and tape off the floor below the baseboard. You should only have to do one strip above and below baseboard to protect wall and floor. Now paint.

 
+5

Answer by  Sockless (528)

Clean them well with cleaner that does not leave much residue (TSP, etc) then be sure to rinse them and let them dry. Fill in any caulking or other patching that is needed and sand smooth. The using masking tape tape off the edges of what needs to be painted and place a cover on the floor.

 
You have 50 words left!