how to
 

 how to  hvac







 

Question by  Liz (83)

How do I go about resetting Janitrol AC compressors?

 
+7

Answer by  mary70 (101)

Should be a limit switch with a red button sticking out. push it and that should reset the thing. It could also be a bad board. Would have to replace that and that should fix. If not then just get another one.

 
+7

Answer by  worker6055 (24)

Tighten power supply terminal and have circuit breaker tested. Have the compressor checked for faulty or worn bearings. Have compressor checked for worn motor winding.

 
+7

Answer by  pandi68 (35)

I would suggest first of all referring back to your owners manual if it is available. If not try either looking in the yellow pages for a professional or even try looking up compressors on the internet. There are probably hundreds of sites that could help you there.

 
+6

Answer by  Advisor (1032)

If you need to reset the entire system, look on the back of the unit or under the filter door (depending on the model) for a red or black reset button. You will need to press until you hear a click and then restart the unit.

 
+2

Answer by  R (19)

Try putting the fan to the "ON" position at the t-stat. The blower fan should run independent of either the heat or cool.

 
+0

Answer by  tish (17)

First you shut off the power to at disconnect to unit. Leave power off for atleast 30-60 seconds. Then restore power at disconnect.

 
You have 50 words left!