car repairs






 

Question by  lance (26)

How do I replace the intake gasket on my Malibu?

 
+7

Answer by  Jsands1982 (871)

The intake gasket is a part that will take time to intall. also a lot of parts and fuilds are invovled. Consult a website, Rebuild Manual for how to instructions.

 
+6

Answer by  drew89 (117)

Unbolt all necessary bolts and screws until the intake plenum is able to be pulled off. Make sure all sensors are unplugged. Take the intake off and remove the old gasket. Install new gasket and reinstall intake.

 
+6

Answer by  thattractorguy (2970)

You will have to remove the intake manifold. Scrape off all the old gasket and put the new gasket on. Put the intake manifold back on.

 
+6

Answer by  Amber40 (24961)

The first thing to do as always is disconnect your battery. Next drain your radiator. Then disassemble the upper half of the engine. Removing everything on top of the cylinder head. Then pull of the head, clean off the old gasket, install the new one, then bolt it back together.

 
+3

Answer by  worker8388 (994)

Remove the air cleaner assembly and carburetor. Upper radiator hose,distributor should be removed. Place both gaskets on mating surface of the engine. Insert the manifold's bolt and tighten with wrench.

 
+1

Answer by  japratt (1687)

You will need to under the car of your Malibu. Once there you can locate it in the middle section under the car.

 
You have 50 words left!