bathroom
 






 

Question by  Jim (20)

How should I repair a crack in the bottom of my shower?

 
+7

Answer by  xazurianx (330)

If your shower is made of interwoven fiberglass as most are, you can simply purchase a fiberglass filler compound and apply it generously over the crack. Smooth over to remove excess compound and allow 24 hours to dry. Use a medium grit sand paper to smooth it, and then a fine grit sandpaper to bring it to a mirror finish.

 
+6

Answer by  RickyRoss (27)

First clean the shower. As disgusting as this already is, you don't want any mold to take root. Not only use a shower cleaner, clean the shower once more and bleach the hell out it. Dry the shower, Next you're going to fill it with caulk. Lay down a coat or two of polyurethane.

 
+6

Answer by  RobertJamey (124)

How big is the crack? If it is not a wide crack, you probably can manage to fix it with help of some hot/cold silicone. I always have a tube of silicone at home to fix that kind of stuff. Silicone should be sufficient, if the crack is wider, you might need tiles as well.

 
+5

Answer by  Nina111 (30)

I would suggest getting some might putty and filliing it in then, smooth it out with some sandpaper, then put a shower mat on the bottom.

 
You have 50 words left!