diy
 






 

Question by  Dbthompson (28)

What can be done for a bed post fracture?

My bed post is broken.

 
+7

Answer by  tmc1581 (22)

dpending on where the fracture is, it could maybe be fixed with some type of epoxy or glue. maybe try putting screws, in a unseen area if possible. if fracture i completely through try a decorative bolt in area, adding the same decor hardware on all four posts to match.

 
+7

Answer by  Emily76 (58)

The most obvious option is to use wood glue. However, if the bed is not an important piece you might concider cutting down the bed post much like you would file down your nails if one of them broke. Once that done and they are all even again you can top with a new topper and have a new bed!

 
+7

Answer by  rlgoard (84)

Depending on the severity of the break, ordinary wood glue may fix the problem. After applying the glue use clamps to keep pressure on it until the glue has cured. For larger breaks that are completely severed, you can drill holes in both ends and install dowel pins and glue.

 
+5

Answer by  jennycountrysidegirl (96)

A broken bed post can easily be fixed in some cases. Depending on where the fracture is you can restablize it so it will be sturdy again but if the fracture is in a critical spot or is a large fracture you may need to replace it.

 
+2

Answer by  lilraesdad (41)

Depend on the break. If it split length-wise then glue and clamp together. If it broke in half get a double ended wood screw and screw back together.

 
You have 50 words left!